Panorama Electrical Elevator Microcontroller Interfacing Circuit Part 1

Summary

The same PIC programmed to connect another two input ports and two output ports to control the car door. The two input ports ... Shaft is the space where the car moves up and down. In this project, it contains two rectangular steel plates as basement and roof, ... In this project, there are two kinds of doors: car door and landing doors. Car door stay with the car when it moves, and the landing ... Car is the object, which carries the load and moves up and down directions by the drive system through the shaft according to two ... Controlling the position of the car depends on controlling the main motor by changing its direction and turning it on and off when ... Main drive system moves the car and the counter weight up and down directions. It contains the DC Wiper Motor, two same ... Door drive system was tested and controlled firstly by connecting the door motor to the power supply directly. Then, drive Four wheels fixed down on the basement of the shaft to move the project freely. Four Stainless steel plates fixed on the edges of ... Doors drive system depends on Rack and Pinion Mechanism on Car door. Such mechanism used to transform rotational motion ... Counter weight is a very essential A high carbon steel rope, connects the car, the counter weight and main drive system with each other. It was divided to have four ... When the car stops at a floor, car door and landing door must open together. On the car, motor will open the car door, so, there ...